All-steel cylinder cabinet is mainly used for storing all kinds of cylinders, including experimental hydrogen, acetylene, ethylene, gas and other combustible gas cylinders, oxygen and other gas cylinders, and nitrogen, argon and other compressed gas cylinders. As well as nitrogen, argon and other compressed gas cylinders. These cabinets are made of cold rolled steel plates and are designed to protect gas cylinders from damage and to give an alarm when there is a leakage of gas cylinders, automatically opening the exhaust system.

All-steel gas cylinder cabinets are metal containers used to improve localized exhaust ventilation and to protect cylinders (gas cylinders) from fires outside the cabinet as well as to protect surrounding objects from fires inside. Cylinder cabinets have a blowdown system, an alarm and an exhaust vent inside, and are usually available in one-bottle, two-bottle and three-bottle configurations.

1. without alarm specifications for single bottle (600 * 450 * 1850), double bottle (900 * 450 * 1850), three bottles (1200 * 450 * 1850), with alarm specifications for single bottle (600 * 450 * 1900), double bottle (900 * 450 * 1900), three bottles (1200 * 450 * 1900).

2. 1.0mm thick high-quality galvanized sheet welding, the surface of the epoxy resin electrostatic spraying corrosion-resistant treatment, moisture and heat resistance.

3. using microcomputer timer switch, high sensitive probe detection of air leakage automatic exhaust alarm.

Product maintenance and self-test

When the gas cylinder stored in the product, in the non-human condition will not appear any condition, in order to prevent a long time the alarm device is at rest and the alarm is slow or no alarm, the staff can be through the smoke and gas on the product alarm test, so as to achieve the normal operation of the product. Note:Self-test time is generally January to February self-test once.

Attention

When the product encounters a power failure or power outage from the new start, the control system should be set up to avoid affecting the normal work. The function setting must be set to pump air at regular intervals, and the pumping time per day can be set by yourself according to the usage.