In laboratory selection and purchase, we often find that the price of two similar lab benches is much different, and even the price of lab benches produced by the same manufacturer varies greatly. Is the seller intentionally raising the price? In fact, there are many factors that affect the price of the laboratory bench, resulting in a large price difference between the laboratory bench.
1, according to the layout of the laboratory and experimental needs, the laboratory bench is subdivided into experimental side table, central table and corner table, so there are differences in price. The central table is the most expensive, followed by the side table and then the corner table. According to the desktop material, it is also divided into PP lab bench, all-steel lab bench, steel wood lab bench, PP>all-steel>steel wood. These are the factors that affect the price of the laboratory table.
2, the structure and material of the laboratory table is also a major factor affecting the price, which is often the reason why two laboratory tables look very similar but the price is very different. Because most laboratories often need to be customized, the more complex the frame, the higher the processing labor and material resources, and need better materials, so the price will be more expensive. At the same time the size of the laboratory table also determines the price, the larger the general laboratory table area, the more expensive.
3, the difference in price of the laboratory bench supporting facilities. Purchase of the experimental bench generally need to buy the appropriate accessories and equipment, manufacturers in the purchase of the experimental bench is often based on their own experimental needs to choose the relevant practical accessories and facilities, part of the experimental bench also requires ventilation facilities, including the choice of fans and ventilation duct construction. Therefore, the same experimental bench due to different accessories, the price will produce a big difference.
4, the market price mechanism, including competition, will also lead to price fluctuations in the laboratory bench.
These are the factors that affect the price of the laboratory bench. The price of a lab bench is affected by many factors, so it is recommended to carefully consider all aspects when purchasing.

When a laboratory is designed and installed with an experimental platform, the layout should not only meet the experimental needs, but also meet the safety evacuation requirements in case of an emergency. Once an emergency occurs, no matter where the experimenter conducts the experiment, there should be two ways to choose from, and you can quickly exit the lab in an emergency.
There are three types of experimental platforms: experimental center table, experimental side table, experimental corner table. The spacing of the experimental central platform is generally not less than 130cm, so it can be convenient for experimenters to walk freely. The traffic area is relatively large, which is conducive to evacuation; if you need to set up special configurations in front of the platform, such as gas storage cylinders, the spacing should be set to a net distance of 160-180cm.
During the operation of this type of lab bench, the experimenter is operating back to back. If necessary, a separate screen can be added in the middle of the aisle. The separate screen should consist of non-combustible material to prevent the experimenter from harming the opposite chemical. The spacing should also be increased a little at this point, and the distance between the lab bench and the fume hood should not be less than 125 cm.
The height and width of the lab bench should be appropriate for ease of operation. Generally speaking, the height of the table can be 85-90cm, except for some special tests, which need to determine the corresponding table height. Generally, the net width of the table can be 65 cm. if more equipment needs to be installed on the table, it can be widened appropriately to facilitate operation. The width of reagent bottle rack can be 20-30cm, so the width of a table can be 75-85cm. if it is double-sided, the width of the table can be 150-160cm.
Not the same laboratory application of the test table material is not the same, the main materials are steel, wood, etc., practicing microbiology research biochemical laboratory selection of the table should be selected seamless white table. Regardless of which material is selected, the table should be firm and flat, seamless, no leakage, wear resistance, heat resistance, corrosion resistance, sufficient hardness, not easy to scratch, but not easy to touch the broken glassware.
When installing the test bench, the correct location should be chosen. If the laboratory uses natural lighting, then the outer wall of the test bench and the lighting window should not be parallel. Otherwise, once the experimenter's back is to the window, the experimenter's silhouette will appear on the table; when facing the window, there will be dazzling light.

All-steel laboratory bench is one of the many experimental bench, this material is more widely used in the use of the experimental bench, which also stems from the use of this material of the experimental bench itself performance is superior. Now we see the all-steel laboratory bench, its cabinet using national standard 1.0 thickness steel plate, CNC cutting treatment, all again after the phosphating process, and then use epoxy resin for electrostatic spraying, after such high temperature treatment, the whole cabinet has a very good solidity and corrosion resistance. We use all-steel laboratory bench, the main thing is to consider the material of the laboratory bench and anticorrosion ability, because the experimental process may cause some damage to the cabinet and countertop, if the material of the laboratory bench itself is not stable, then it will also reduce the service life of the laboratory bench. Designers not only take into account the use of the function of the laboratory bench, but also take into account the overall laboratory migration will encounter inconvenience, so the development of a detachable standard box, in the absence of the need for more manpower and material resources, easy to migrate to the laboratory bench, reuse, re-combination of random, thus realizing a reduction in the cost of the relocation of laboratories brought to the enterprise, the institutions caused by the increase in costs.
Secondly, the solid strength of all-steel laboratory bench is also very high, especially in the placement process, the box will directly support the entire table, this method will also make the entire table more firmly placed, this design method also gives the all-steel laboratory bench provides better performance advantages. In some special laboratories, the design of the experimental bench will use the principle of slide, so that we can do experiments to provide some convenience, and all-steel experimental bench in the design of the slide has an incomparable advantage, the slide is sprayed with paint treatment, so the use of the process is not easy to deform, but also to reduce the noise, to provide a quieter environment for our experiments.
We are choosing the experimental bench, in consideration of practicality and firmness on the basis of the appearance of the experimental bench, all-steel experimental bench on the design of the entire table, whether it is the table or supporting facilities are all uniform materials and colors, which also increases the beauty of the experimental bench.